Galvalume prepainted steel coil for prefabricated building envelope systems

Send Inquiry
Galvalume prepainted steel coil for prefabricated building envelope systems
Details
Our Galvalume prepainted steel coil is made for prefabricated building envelope systems — roof sheets, wall cladding and sandwich panels that have to perform in the field, not just on a spec sheet.
We start with a 55% aluminum-zinc alloy coating on a tight-tolerance steel substrate, then add a two-coat paint system (PVDF, HDP or SMP) matched to the climate the building actually faces. Salt spray performance and color retention are checked coil by coil, and each order can be slit to width or cut to length for your panel profile.
Category
Prepainted Galvalume Steel Coil
Share to
Description

Product Description

 

Width:

40mm - 1250mm

Zinc Coating:

AZ20 - 150g/m2

Thickness:

0.12mm - 3.00mm

Paint: PE,SMP,PU,HDP,PVDF,etc

Length:

As require

Composition: 55%Aluminum+45%Zinc

Type:

Coil/Sheet/Plate/Strip

Color:

RAL Color or As required RAL

product-350-350
product-350-350
product-350-350

 

Product Features

 

Galvalume prepainted steel coil is built for prefabricated building envelope systems, where panels have to stay flat, sealed and true to color for decades.

The 55% Al-Zn alloy coating outlasts hot-dip galvanized steel in coastal and industrial air, so panels hold up where salt and humidity are daily.

The two-coat paint system - PE, SMP, HDP or PVDF - resists chalking and fading, with color and gloss retention tuned to the local climate.

Coating weight and paint film are held to tight tolerances coil after coil, so the steel rolls, cuts and punches cleanly without cracking, keeping panel production predictable.

In a sandwich panel, the same coil adds strength without adding weight.

Products Description

 

Galvalume prepainted steel coil is specified wherever prefabricated building envelopes have to sit outside and stay put for decades.

 

 Roof sheets and standing-seam profiles on pre-engineered warehouses and logistics centers

 Wall cladding and external fascia on modular and pre-engineered buildings

 Facings for PIR, EPS and rock-wool sandwich panels in cold storage and clean rooms

 Gutters, flashings and ridge caps, cut from the same coil so the whole envelope matches in color and coating

 

In our experience, the 55% aluminum-zinc coating stops rust at cut edges, and the PVDF or HDP topcoat holds color far longer than standard polyester. That is why fabricators keep coming back to it.

product-320-320
product-320-320
product-320-320
product-320-320
 
 
 
 

Packaging and Transportation

 

Our coils are packed for the long haul - rust-proof paper, heavy-duty PP film and steel edge protectors, banded onto a wooden pallet or steel skid. Standard seaworthy export packing, so the load arrives at the port exactly as it left the mill.For overseas orders we ship by 20/40-foot container or break-bulk vessel, arranged to cut wasted space and speed up your unloading. Mill test certificates, packing lists, invoices and certificates of origin are prepared before the vessel sails.Production takes 15–25 days after deposit. You get loading photos and a traceable batch record with every order.

product-350-350
product-350-350
1. How long is the delivery period of the product?

Normally, the lead time is 20-35 days.

2. How can we guarantee the quality?

We can provide free samples for your reference prior to order confirmation.We will also share all test videos and photos with you once production is completed.

3. Could you accept a third-party test?

Yes, third-party testing is acceptable. We are able to send free samples to your lab for testing as well.

Hot Tags: Galvalume prepainted steel coil for prefabricated building envelope systems, China Galvalume prepainted steel coil for prefabricated building envelope systems manufacturers, suppliers, factory, Tinplate Coil, other galvanized steel product, Electronic Galvanized Steel Coil, galvanized steel plate, electro galvanized steel, zincalume sheet

Send Inquiry