Features
Aluminum zinc coated substrate is resistant to rust and high temperature, and the phosphating layer makes the paint layer stick firmly without peeling off. It has stronger short-term rust prevention and is easier to process and spray
Parameter
|
Thickness |
0.12mm-3.0mm |
Customization can be made according to your requirements |
|
Width |
40mm-1250mm |
|
|
Zinc coating |
AZ20-220g/㎡ |
|
|
Hardness |
CQ, Full hard, Soft, Middle Hard |
|
| Composition | 55%Aluminum+45%Zinc | |
|
Standard |
ASTM-A792,ASTM653,etc |



Applicable fields
Phosphating aluminum zinc adhesive paint and film are particularly strong, mainly used in places where painting, electrophoresis, and film coating are required, such as household appliance casings, automotive parts, construction machinery, high-end building materials panels, etc.



Chemical composition
|
Part |
Core components (quality score) |
|
Aluminum zinc coating |
Al55%+Zn43.5%+Si1.5% |
|
Phosphating film layer |
Zinc phosphate/zinc iron phosphate (containing small amounts of zinc, iron, phosphorus, and oxygen) |
Production process
|
Step number |
Process Name |
Key operating points |
|
Step 1 |
Substrate pretreatment |
Remove oil and dust, ensure substrate cleanliness, and enhance coating adhesion |
|
Step 2 |
Substrate restoration |
High temperature reduction of the substrate surface oxide layer forms an active iron surface, which facilitates the adhesion of the plating solution |
|
Step 3 |
Core hot-dip coating |
Immerse in aluminum zinc silicon alloy plating solution, precise control of coating thickness with air knife to ensure uniformity |
|
Step 4 |
Cooling after plating |
Uniform cooling to avoid coating cracking and uneven zinc plating, ensuring the performance of the base coating |
|
Step 5 |
Phosphating pretreatment |
Weak alkali degreasing+weak acid activation, removing zinc ash/oil stains after plating, activating the surface of the coating |
|
Step 6 |
Surface phosphating |
Room temperature/medium temperature zinc based phosphating generates 1-3 μ m zinc phosphate/iron zinc composite crystalline film |
|
Step 7 |
Phosphating post-treatment |
Reverse flow rinsing thoroughly removes residual phosphating solution to prevent surface white spots and powdering |
|
Step 8 |
finished product shaping |
60-80 ℃ hot air drying, dense solid film, removes moisture, can be directly processed afterwards |


Three system certifications for more secure cooperation
Our factory has obtained three authoritative system certifications: ISO9001 quality management, ISO14001 environmental management and ISO45001 occupational health & safety management. These standard accreditations lay solid foundations to safeguard every aspect of your cooperation with us.
First of all, consistent product quality is fully secured. Our team carries out strict tracking and inspection covering every production link, from incoming raw material inspection all the way to finished product testing. This full-process supervision keeps product performance steady, letting you deploy our goods without any quality concerns.
We also deliver steady, on-time supply thanks to standardized manufacturing workflows. Strict site safety rules greatly cut down potential production shutdown risks, so unexpected supply halts will never delay your order shipment.
Besides, all our manufacturing activities comply with global environmental standards. This makes it simple for you to pass green procurement audits and match sustainable development standards for your projects.
Above all, our complete management system and mature risk control mechanisms remove most hidden troubles in cooperation. You won't need to spend extra energy dealing with quality disputes or partnership risks throughout our transaction.



Hot Tags: Galvalume Steel Coil, China Galvalume Steel Coil manufacturers, suppliers, factory, prepainted galvalume coil, galvalume material, galvalume 55, Fhosphated Galvalume Coil, galvalume steel coil, coil galvalume